Product Information Data Sheet
Profelm electronics S.A: http://www.profelm.com
Product name / ID:	Controllers for Roller Shutters at a very compact size for TUBOLAR AC motors
Product Image:
Product Information:	Installation and Programming This RF automation due to a very compact size can be installed in the tubolar motor housing. A normal up - down button for the manual motor activation in the up or down direction can be connected on the board. The motor working time is constant 2 minutes, every time we activate the motor with the use of a transmitter. A jumper is fitted on the up left corner of the PCB. When we power up the automation, for the first 10 seconds, we press the button of the transmitter constantly for 4 seconds and the new transmitter code is automatically programmed. Every time we power up the automation, with the jumper fitted, the RF coding programming routine is activated for the first 10 seconds. If during this time we do not program a new code or we press the transmitter with the already programmed code, the motor is activated. If we remove the jumper from the board, a new coding programming is not possible and the automation will always keep the programmed code for up to 5 years without power supply.
The units include a watchdog timer circuit to insure that program and system status are not lost or changed in AC power failure.
Compact size, very reliable on hard use at a very competitive price
Product Description:	Technical characteristics: Power supply: from 200 to 240 VAC. RF frequency Coding: AUTO Learning code modular RF receiver. Motor operating time: Standard 2 minutes Absorption: 8 mA at stand-by. Power Handling: For 10-150W AC motors with internal terminal switches Working temperatures: -10 to +60 Celsius. Sizes: 36(W) X 83(L) X 22(H) mm including housing to be fitted IN the tubolar motor housing.
Modulated signal reception with RF sensitivity measured with input ON-OFF signal better than 5ìV (-93dBm) in band center, RF bandwidth at -3dB >+4MHz, with high-reliability SIL thick-film hybrid circuit of all RF modules. Low output logic level to microprocessor in case of FR module signal not present.
Product Added Information:	Versions: 306 MHz receiving frequency with National Coding PR-2021N: RF remote controller for Roller Shutters at 230VAC 318 MHz receiving frequency with Motorola Coding PR-2021: RF remote controller for Roller Shutters at 230VAC 433,92 MHz receiving frequency with National Coding PS-2021N: RF remote controller for Roller Shutters at 230VAC 433,92 MHz receiving frequency with Motorola Coding PS-2021: RF remote controller for Roller Shutters at 230VAC
For USA: Controllers at 110VAC, 60Hz are also available
Product Related File:	Dowload It	Print This Data Sheet
Go To Page 1