| Product Information Data Sheet | |||
|
Profelm electronics
S.A: http://www.profelm.com
|
|||
|
Product name / ID:
|
Controllers for Roller Shutters
|
||
|
Product Image:
|
 |
||
 |
|||
|
Product Information:
|
Our controllers for all AC motors with internal terminal switches up to 800W supply the AC motor with constant neutral power (no neutral relay) and there is NO warning light output. For programming, when the construction is powered, we press the timer button and keep it pressed to enter the desired working time. Then we select our personal code from the dipswitches of the transmitter. To save the code of the transmitter, we press the code button of the controller and while we are keeping it pressed, we press the transmitter button until the green indicating LED flashes. The new code is programmed. | ||
|
The units include a watchdog
timer circuit to insure that program and system status are not lost
or changed in AC power failure.
|
|||
|
Compact
size, very reliable on hard use at a very competitive price
|
Terminal
Connections for ALL available models 1-2:Power supply 230Vac (1=phase, 2=neutral,) 3: Motor common neutral wire 4: Motor Close phase wire 5: Motor Open phase wire 6-7: External button activation, normally open (NO) contact 8: Antenna wire |
||
|
Product Description:
|
Technical
characteristics: Power supply: from 160 to 250 VAC. RF frequency Coding: Learning code modular RF receiver. Motor operating time: programmable from 1 to 180 seconds. Absorption: 10 mA at stand-by. Power Handling: For 50-800W AC motors with internal terminal switches Working temperatures: -10 to +60 Celsius. Sizes: 111 X 82 X 30mm including ABS housing. |
||
|
Modulated
signal reception with RF sensitivity measured with input ON-OFF signal
better than 5ìV (-93dBm) in band center, RF bandwidth at -3dB
>+4MHz, with high-reliability SIL thick-film hybrid circuit of all
RF modules. Low output logic level to microprocessor in case of FR module
signal not present.
|
|||
|
Product Added Information:
|
Versions:
306 MHz receiving frequency with National Coding PR-2019N: RF remote controller for Roller Shutters at 230VAC 318 MHz receiving frequency with Motorola Coding PR-2019: RF remote controller for Roller Shutters at 230VAC 433,92 MHz receiving frequency with National Coding PS-2019N: RF remote controller for Roller Shutters at 230VAC 433,92 MHz receiving frequency with Motorola Coding PS-2019: RF remote controller for Roller Shutters at 230VAC |
||
|
For USA:
Controllers at 110VAC, 60Hz are also available |
|||
|
Product Related File:
|
Dowload It
|
Print This Data Sheet
|
 |